the new PAPR mask2 November 2020
Throughout welding operations, safety is closely linked also to the quality of the air. The right tools must be chosen to protect yourself when welding in zones without an efficient extraction system or if it is complicated to control operator exposure to welding fumes.
The PAPR (Powered Air Purifying Respirator) Air Lite mask meets this requirement: not only does it guarantee total protection at face level, but it filters air externally making it purified and breathable for the operator for up to 8 hours of use.
Air Lite is a variable automatic darkening mask. In fact, darkening can be possible on a dual scale of values (5÷8/ 9÷13 DIN) based on the welding process or the application.
The wide viewing area (98x55 mm) combined with the 4 sensors and the darkening speed (0.1 ms) make Air Lite safe in the most variable applications.
AirLitecan be used for all MMA, MIG-MAG and TIG (>5 A) welding processes, and is fit, as well, with the specific function for grinding.
The respirator, thanks to the integrated filter, (TH2) ensures high quality air is inhaled by the operator.
DOUBLE SPEED OF AIR FLOW
2-speed air flow:
- Normal: 150LPM
- High: 180LPM
The respirator has a double speed to adjust the filtered air flow inside the welding mask according to processing.
UP TO 8 HOURS OF NON-STOP USE
The respirator is powered by a lithium battery that guarantees its operation over time (up to 8 hours at normal use). The battery charge status, signalled with the specific led, is always directly visible on the front of the respirator to monitor its progress.
Concentration on your work must not be to the detriment of safety. In fact, an acoustic alarm signals to the operator both the battery is almost flat and obstruction of the filter on the mask.
AirLite is supplied in a practical bag for carrying or storage it after each use and comes with numerous accessories.