TelwinTelwin
Find

 
 

null ELECTROMIG 550 SYNERGIC

code 816193
Click to open expanded view
  • code 816193

 
Ask for information
 
  • ELECTROMIG 450 SYNERGIC AQUA
    Previous product

    ELECTROMIG 450 SYNERGIC AQUA

    Go to page
  • ELECTROMIG 550 SYNERGIC AQUA
    Next product

    ELECTROMIG 550 SYNERGIC AQUA

    Go to page
 
 

Overview

ELECTROMIG 550 SYNERGIC

code 816193
MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift multiprocess inverter welding machine controlled by a microprocessor, with 4-roller wire feeder. Flexible use with various welded materials (steel, stainless steel, aluminium) or brazed materials (galvanised sheet metal). Wide variety of application fields, from industry to maintenance, installation to bodywork activities. Synergic adjustment makes the product simple to use. The Made in Telwin ATC technology makes it easy to achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc.
Features:
- Manual or synergic operating;
- 40 pre-set synergic curves;
- Possibility of creating, saving and retrieving customised welding programs;
- MIG-MAG adjustments: wire up slope, electronic reactance, wire burn-back time, post gas;
- 2/4 time operation selection, Bi-Level, spot, inch and mm material thicknesses;
- Adjustments in MMA: hot start, arc force, anti-stick;
- VRD selection.
- Protections: thermostatic, overvoltage, undervoltage, overcurrent, engine driven generator (+/-15%);
- TIG Lift
Complete with MIG-MAG torch, cable and earth clamp.

MMA TIG DC LIFT MMA TIG DC LIFT
COIL 15 kg COIL 15 kg
MIG-MAG FLUX MIG-MAG FLUX
CE MARKING CE MARKING
3 PH 230V-400V 3 PH 230V-400V
EAC CERTIFICATION EAC CERTIFICATION
REMOTE CONTROLS REMOTE CONTROLS

ELECTROMIG 550 SYNERGIC

code 816193

Technical data

CODE 816193
POWER FACTOR 0,9
THREE PHASE MAINS VOLTAGE 230 / 400 V
D. USABLE ELECTRODES IN DC 1,6 - 8 mm
MAINS FREQUENCY 50 / 60 Hz
STEEL WELDING WIRE DIAMETER 0,6 - 2,4 mm
CURRENT RANGE 20 - 400 / 20 - 500 A
INOX WELDING WIRE DIAMETER 0,8 - 2,4 mm
MAX CURRENT 400 @ 40% / 500 @ 40% A
ALUMINIUM WELDING WIRE DIAM. 0,8 - 1,6 mm
DC CURRENT 330 / 400 A
FLUX CORED WELDING WIRE DIAM. 1 - 2,4 mm
MAX NO LOAD VOLTAGE 110 / 85 V
BRAZING WIRE DIAM. 0,8 - 1,2 mm
MAX ABSORBED CURRENT 45 / 35 A
PROTECTION DEGREE IP23
ABSORBED CURRENT AT 60% 32 / 23 A
DIMENSIONS 103 x 51 x 145 cm
MAX ABSORBED POWER 17 / 23 kW
WEIGHT 86
ABSORBED POWER AT 60% 11 / 15 kW
EAN CODE 800489799465 9
EFFICIENCY 90 %

Accessories

Included Accessories

FEED ROLL 4R 0,8FE-1,0FE "P-K" 722227
MT40 MIG TORCH 4M 742820
FEED ROLL 4R 1,2FE-1,6FE "P-K" 722241
WORK CLAMP + CABLE 70MMQ 3M AX70 804222
 
 

Download

ELECTROMIG 550 SYNERGIC

code 816193

 Data sheet

 Instruction manual

 Image