null ELECTROMIG 550 SYNERGIC

 code 816193
Click to open expanded view
  •  code 816193

 
 
  • ELECTROMIG 450 SYNERGIC AQUA
    Previous product

    ELECTROMIG 450 SYNERGIC AQUA

    Go to page
  • ELECTROMIG 550 SYNERGIC AQUA
    Next product

    ELECTROMIG 550 SYNERGIC AQUA

    Go to page
 
 

Overview

ELECTROMIG 550 SYNERGIC 230V/400V +ACC

code 816193
MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift multiprocess inverter welding machine controlled by a microprocessor, with 4-roller wire feeder. Flexible use with various welded materials (steel, stainless steel, aluminium) or brazed materials (galvanised sheet metal). Wide variety of application fields, from industry to maintenance, installation to bodywork activities. Synergic adjustment makes the product simple to use. The Made in Telwin ATC technology makes it easy to achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc.
Features:
- Manual or synergic operating;
- 40 pre-set synergic curves;
- Possibility of creating, saving and retrieving customised welding programs;
- MIG-MAG adjustments: wire up slope, electronic reactance, wire burn-back time, post gas;
- 2/4 time operation selection, Bi-Level, spot, inch and mm material thicknesses;
- Adjustments in MMA: hot start, arc force, anti-stick;
- VRD selection.
- Protections: thermostatic, overvoltage, undervoltage, overcurrent, engine driven generator (+/-15%);
- TIG Lift
Complete with MIG-MAG torch, cable and earth clamp.

MMA TIG DC LIFT MMA TIG DC LIFT
COIL 15 kg COIL 15 kg
MIG-MAG FLUX MIG-MAG FLUX
CE MARKING CE MARKING
3 PH 230V-400V 3 PH 230V-400V
EAC CERTIFICATION EAC CERTIFICATION
REMOTE CONTROLS REMOTE CONTROLS

ELECTROMIG 550 SYNERGIC 230V/400V +ACC

code 816193

Technical data

THREE PHASE MAINS VOLTAGE 230 / 400 V
POWER FACTOR (cosphi) 0,9
MAINS FREQUENCY 50 / 60 Hz
D. USABLE ELECTRODES IN DC 1,6 - 8 mm
CURRENT RANGE 20 - 400 / 20 - 500 A
STEEL WELDING WIRE DIAMETER 0,6 - 2,4 mm
MAX CURRENT DC (EN 60974-1) 400 @ 40% / 500 @ 40% A
INOX WELDING WIRE DIAMETER 0,8 - 2,4 mm
DC CURRENT 330 / 400 A
ALUMINIUM WELDING WIRE DIAM. 0,8 - 1,6 mm
MAX NO LOAD VOLTAGE 110 / 85 V
FLUX CORED WELDING WIRE DIAM. 1 - 2,4 mm
MAX ABSORBED CURRENT 45 / 35 A
BRAZING WIRE DIAM. 0,8 - 1,2 mm
ABSORBED CURRENT AT 60% - MAX 32 / 23 A
PROTECTION DEGREE IP23
MAX ABSORBED POWER 17 / 23 kW
DIMENSIONS 103 x 51 x 145 cm
ABSORBED POWER AT 60% 11 / 15 kW
WEIGHT 86 kg
EFFICIENCY 90 %
EAN CODE 800489799465 9

Accessories

Included Accessories

FEED ROLL 4R 0,8FE-1,0FE "P-K" 722227
MT40 MIG TORCH 3 M 722798
FEED ROLL 4R 1,2FE-1,6FE "P-K" 722241
WORK CLAMP CABLE 70MMQ 3M DX70 723032
 
 

Download

ELECTROMIG 550 SYNERGIC 230V/400V +ACC

code 816193

 Data sheet

 Instruction manual

 Image