TECNICA 188 MPGE

 code 816212
Click to open expanded view
  •  code 816212
 
 
 
 

Overview

TECNICA 188 MPGE 230V ACX+PLAST.C.CASE

code 816212
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking. Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. Recommended for motorgenerators, this model grants high performance despite power supply instability, thanks to the MPGE multiprotections: control device of the wave form, filter against input peaks, stabilization ofoscillations. Characteristics: compact and light * high welding current stability in spite of mains voltage fluctuations * arc force, hot start and anti-stick devices * thermostatic, overvoltage, undervoltage, overcurrent protections. Complete with MMA welding accessories and plastic carry case.

MMA TIG DC SCRATCH MMA TIG DC SCRATCH
EAC CERTIFICATION EAC CERTIFICATION
1 PH 230V 1 PH 230V
TÜV CERTIFICATION TÜV CERTIFICATION
CE MARKING CE MARKING

TECNICA 188 MPGE 230V ACX+PLAST.C.CASE

code 816212

Technical data

CODE 816212
MOTORGENERATOR MINIMUM POWER 6 kW
SINGLE PHASE MAINS VOLTAGE 230 V
MAINS FUSE 16 A
MAINS FREQUENCY 50 - 60 Hz
EFFICIENCY 86 %
CURRENT RANGE 10 - 150 A
POWER FACTOR (cosphi) 0,7
%USE (20°C USE) 88% % - 150A
D. USABLE ELECTRODES IN DC 1,6 - 4 mm
MAX CURRENT 140 A - 25 %
PROTECTION DEGREE IP23
CURRENT AT 60% 95 A
DIMENSIONS 38 - 42 - 17 cm
MAX NO LOAD VOLTAGE 75 V
WEIGHT 7 kg
MAX ABSORBED CURRENT 28 A
EAN CODE 800489782871 8
ABSORBED CURRENT AT 60% - MAX 17 A
PIECES/PALLET 36 pz/pallet
MAX ABSORBED POWER 4,2 kW
PIECES/PALLET - B 30 pz/pallet - B
ABSORBED POWER AT 60% 2,6 kW

(*)%USE:DATUM CREATED BY TELWIN, NOT INCLUDED IN THE EN 60974-1.

Accessories

Included Accessories

CABLE TW05V-A 1X025 L=1.80M DINSE 124589
 PLASTIC CARRY CASE 322800
 DALLAS 300 ELECTRODE HOLDER 300A 712260
 TOLEDO 250 WORK CLAMP 250A 712030
 
 

Download

TECNICA 188 MPGE 230V ACX+PLAST.C.CASE

code 816212

 Data sheet

 Instruction manual

 Image