SUPERIOR TIG 421 DC

 code 816103
Click to open expanded view

 
 
 
 

Overview

SUPERIOR TIG 421 DC-HF/LIFT 400V+ACC

code 816103
Microprocessor controlled, TIG (high frequency HF or LIFT striking), PULSE TIG and MMA inverter welding machine in direct current (DC).
Use with a wide range of materials such as steel, stainlesssteel, titanium, copper, nickel and their alloys.
Features:
- pulse and EASY pulse operation
- 9 customized welding programmes
- TIG regulations: bi-level, start up/end current, spot welding time, pre/post gas, current up/down slope, balance DC, square wave frequency
- MMA regulations: arc force and hot start according to the type of electrode in use
- anti-stick device
- remote control and G.R.A. water cooling connector
- storage on on-board E2PROM of the last 10 alarms
- thermostatic, overvoltage, undervoltage, inside dirtiness, overcurrent, phase failure, water cooling unit protections.
Complete with TIG welding accessories.

TIG DC HF/LIFT MMA TIG DC HF/LIFT MMA
CE MARKING CE MARKING
3 PH 400V 3 PH 400V
EAC CERTIFICATION EAC CERTIFICATION
REMOTE CONTROLS REMOTE CONTROLS

SUPERIOR TIG 421 DC-HF/LIFT 400V+ACC

code 816103

Technical data

CODE 816103
ABSORBED POWER AT 60% 8 kW
THREE PHASE MAINS VOLTAGE 400 V
MAINS FUSE 16 A
MAINS FREQUENCY 50 - 60 Hz
EFFICIENCY 85 %
CURRENT RANGE 5 - 350 A
POWER FACTOR (cosphi) 0,9
MAX CURRENT 350 A - 35 %
D. USABLE ELECTRODES IN DC 1,6 - 6 mm
CURRENT AT 60% 250 A
PROTECTION DEGREE IP23
MAX NO LOAD VOLTAGE 64 V
DIMENSIONS 53 - 24 - 45 cm
MAX ABSORBED CURRENT 21 A
WEIGHT 32,4 kg
ABSORBED CURRENT AT 60% - MAX 13 A
EAN CODE 800489783715 4
MAX ABSORBED POWER 14 kW

Accessories

Included Accessories

 ARGON GAS BOTTLE IT ADAPTOR 432036
 ST26 3P TIG TORCH 4 M 742427
 CABLE 25 MMQ 3 M - DINSE 50 713504
 TOLEDO 300 WORK CLAMP 712231
 GAS REGULATOR 2 MANOMETERS 722119
 
 

Download

SUPERIOR TIG 421 DC-HF/LIFT 400V+ACC

code 816103

 Data sheet

 Instruction manual

 Image