INVERPULSE 625 AQUA

 code 815500
Click to open expanded view
  •  code 815500

 
 
 
 

Overview

INVERPULSE 625 MIG/TIG/MMA 400V AQUA

code 815500
Microprocessor controlled, MIG-MAG (continuous, PULSE, double pulse - PULSE ON PULSE), FLUX/BRAZING,TIG-DC lift and MMA inverter welding machine with 4 rolls, separate wire feeder. Flexibility of use with a wide range of materials such as steel, stainless steel, HSS high strength steels, galvanised sheets, aluminium and its alloys.
The SYNERGIC function allows for a rapid and easy setting of the welding programmes and grants always a high control both of the arc and of the quality of the welding; the remote regulation of the parameters and the possibility to connect to computers or robotized plants, make it particularly suitable for use in the industrial field.
Features:
- continuous, pulse and double pulse operation
- 50 pre-set synergic programmes
- storage of 40 customized welding programmes and of the last 10 alarm states
- possibility to connect to computers or industrial lines
- regulation of bi-level, post-gas time, current down slope, electronic reactance, wire feeder start up, burn-back time
- choice of 2/4 times, spot, bi-level operation
- check control at starting - remote control connector
- thermostatic, overcurrent, overvoltage, undervoltage, phase failure protections.
Complete with trolley, water cooling unit and MIG-MAG welding accessories.

MMA TIG DC LIFT MMA TIG DC LIFT
REMOTE CONTROLS REMOTE CONTROLS
MIG-MAG FLUX MIG-MAG FLUX
COIL 15 kg COIL 15 kg
3 PH 400V 3 PH 400V
CE MARKING CE MARKING
EXTENSIONS MAX 30 m EXTENSIONS MAX 30 m
EAC CERTIFICATION EAC CERTIFICATION
MICROPROCESSOR MICROPROCESSOR

INVERPULSE 625 MIG/TIG/MMA 400V AQUA

code 815500

Technical data

CODE 815500
POWER FACTOR (cosphi) 0,8
THREE PHASE MAINS VOLTAGE 400 V
D. USABLE ELECTRODES IN DC 1,6 - 8 mm
MAINS FREQUENCY 50 - 60 Hz
STEEL WELDING WIRE DIAMETER 0,6 - 2,4 mm
CURRENT RANGE 10 - 600 A
INOX WELDING WIRE DIAMETER 0,8 - 2,4 mm
MAX CURRENT 500 A - 40 %
ALUMINIUM WELDING WIRE DIAM. 0,8 - 1,6 mm
CURRENT AT 60% 400 A
FLUX CORED WELDING WIRE DIAM. 1 - 2,4 mm
MAX NO LOAD VOLTAGE 82 V
BRAZING WIRE DIAM. 0,8 - 1,2 mm
MAX ABSORBED CURRENT 40 A
PROTECTION DEGREE IP23
ABSORBED CURRENT AT 60% - MAX 23 A
DIMENSIONS 113 - 58 - 146 cm
MAX ABSORBED POWER 23 kW
WEIGHT 121 kg
ABSORBED POWER AT 60% 13 kW
EAN CODE 800489730129 7
EFFICIENCY 86 %

Accessories

Included Accessories

 ARGON GAS BOTTLE IT ADAPTOR 432036
 TROLLEY - UNIVERSAL 803071
CABLE 70MMQ 3M-WORK CLAMP-DX 70 723032
 WATER COOLING UNIT GRA 3000 230V 802497
 GAS REGULATOR 2 MANOMETERS 722346
WIREFEEDER AQUA 806045
 MT500 MIG TORCH 3 M AQUA 722625
 
 

Download

INVERPULSE 625 MIG/TIG/MMA 400V AQUA

code 815500

 Data sheet

 Instruction manual

 Image