INVERPULSE 320

 code 815301
Click to open expanded view
  •  code 815301

 
 
 
 

Overview

INVERPULSE 320 MIG/TIG/MMA 400V + ACC.

code 815301
Microprocessor controlled, MIG-MAG (continuous, PULSE, double pulse - PULSE ON PULSE), FLUX/BRAZING,TIG-DC lift and MMA inverter welding machine with built-in 4 rolls wire feeder.
Flexibility of use with a wide range of materials such as steel, stainless steel, HSS high strength steels, galvanised sheets, aluminium and its alloys.
The SYNERGIC function allows for a rapid and easy setting of the welding programmes and grants always a high control both of the arc and of the quality of the welding; the remote regulation of the parameters and the possibility to connect to computers or robotized plants, make it particularly suitable for use in the industrial field.
Features:
- continuous, pulse and double pulse operation
- 50 pre-set synergic programmes
- storage of 40 customized welding programmes and of the last 10 alarm states
- possibility to connect to computers or industrial lines
- regulation of bi-level, post-gas time, current down slope, electronic reactance, wire feeder start up, burn-back time
- choice of 2/4 times, spot, bi-level operation
- check control at starting
- possibility to use with SPOOL GUN and remote control
- thermostatic, overcurrent, overvoltage, undervoltage, phase failure protections.
Complete with MIG-MAG welding accessories.

MMA TIG DC LIFT MMA TIG DC LIFT
SPOOL GUN SPOOL GUN
MIG-MAG FLUX MIG-MAG FLUX
COIL 15 kg COIL 15 kg
3 PH 400V 3 PH 400V
CE MARKING CE MARKING
MICROPROCESSOR MICROPROCESSOR
EAC CERTIFICATION EAC CERTIFICATION
REMOTE CONTROLS REMOTE CONTROLS

INVERPULSE 320 MIG/TIG/MMA 400V + ACC.

code 815301

Technical data

CODE 815301
EFFICIENCY 85 %
THREE PHASE MAINS VOLTAGE 400 V
POWER FACTOR (cosphi) 0,8
MAINS FREQUENCY 50 - 60 Hz
D. USABLE ELECTRODES IN DC 1,6 - 6 mm
CURRENT RANGE 10 - 300 A
STEEL WELDING WIRE DIAMETER 0,6 - 1,2 mm
MAX CURRENT 270 A - 35 %
INOX WELDING WIRE DIAMETER 0,8 - 1,2 mm
CURRENT AT 60% 190 A
ALUMINIUM WELDING WIRE DIAM. 0,8 - 1,2 mm
MAX NO LOAD VOLTAGE 78 V
FLUX CORED WELDING WIRE DIAM. 1 - 1,2 mm
MAX ABSORBED CURRENT 17,5 A
BRAZING WIRE DIAM. 0,8 - 1,2 mm
ABSORBED CURRENT AT 60% - MAX 10,7 A
PROTECTION DEGREE IP23
MAX ABSORBED POWER 10,5 kW
DIMENSIONS 67 - 31 - 56 cm
ABSORBED POWER AT 60% 6 kW
WEIGHT 45 kg
MAINS FUSE 16 A
EAN CODE 800489741396 9

Accessories

Included Accessories

 ARGON GAS BOTTLE IT ADAPTOR 432036
 GAS REGULATOR 2 MANOMETERS 722346
 CABLE 70MMQ 3M-WORK CLAMP-DX 70 713142
 MT36 MIG TORCH 3 M 742186
 
 

Download

INVERPULSE 320 MIG/TIG/MMA 400V + ACC.

code 815301

 Data sheet

 Instruction manual

 Image